What is what to do when plunger doesn't work?

When your plunger isn't working, don't despair! Here's a breakdown of what to do:

1. Ensure proper plunging technique: Make sure there's enough water in the toilet bowl to cover the cup of the plunger. A good <a href="https://www.wikiwhat.page/kavramlar/plunging%20technique">plunging technique</a> involves creating a tight seal and using forceful up-and-down motions without breaking the seal.

2. Try a different plunger: There are two main types: a standard cup plunger (best for flat surfaces like sinks) and a flange plunger (with a soft rubber flap that folds out, designed for toilets). Use a <a href="https://www.wikiwhat.page/kavramlar/flange%20plunger">flange plunger</a> for toilets.

3. Add hot (but not boiling!) water: Hot water can help dissolve grease or other substances that might be contributing to the clog. Be very careful not to use boiling water, as it can crack the porcelain.

4. Use dish soap: Squirt a generous amount of dish soap into the bowl. The soap can help lubricate the clog and make it easier to dislodge. Let it sit for a few minutes before plunging again.

5. Consider a toilet auger (snake): If plunging doesn't work, a <a href="https://www.wikiwhat.page/kavramlar/toilet%20auger">toilet auger</a>, also called a plumbing snake, can physically break up the clog. Carefully insert the auger into the drain opening and twist to break up the obstruction.

6. Check the toilet flapper: A faulty <a href="https://www.wikiwhat.page/kavramlar/toilet%20flapper">toilet flapper</a> can sometimes cause weak flushing, which may be mistaken for a clog.

7. If all else fails, call a plumber: If you've tried all these steps and the toilet is still clogged, it's time to call a professional. There may be a more serious issue deeper in your plumbing system.